Peer review artikel

A stochastic model to predict flow, nutrient and temperature changes in a sewer under water conservation scenarios

Artikelen

“Reducing water use could impact existing sewer systems but this is not currently well understood. This work describes a new flow and wastewater quality model developed to investigate this impact. SIMDEUM WW® was used to generate stochastic appliance-specific discharge profiles for wastewater flow and concentration, which were fed into InfoWorks® ICM to quantify the impacts within the sewer network. The model was validated using measured field data from a sewer system in Amsterdam serving 418 households. Wastewater concentrations of total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN) and total phosphorus (TPH) were sampled on an hourly basis, for one week. The results obtained showed that the InfoWorks® model predicted the mass flow of pollutants well (R-values 0.69, 0.72 and 0.75 for COD, TKN and TPH respectively) but, due to the current lack of a time-varying solids transport model within InfoWorks®, the prediction for wastewater concentration parameters was less reliable. Still, the model was deemed capable of analysing the effects of three water conservation strategies (greywater reuse, rainwater harvesting and water-saving appliances) on flow, nutrient concentrations, and temperature in sewer networks. Results show through a 62% reduction in sewer flow, COD, TKN and TPH concentrations increased by up to 111%, 84% and 75% respectively, offering more favourable conditions for nutrient recovery.”

(Citation: Bailey, O., Zlatanovic, L., van der Hoek, J.P., et al. – A stochastic model to predict flow, nutrient and temperature changes in a sewer under water conservation scenarios – Water (2020)12, art. no. 1187 – DOI: 10.3390/w12041187 – (Open Access))

This is an open access article distributed under the Creative Commons Attribution License

Download pdf
Heeft u een vraag over deze publicatie?